Log in to access members-only content

Helping Drivers Choose the Best Car for Their Journeys.


From the 1st September 2017, all car manufacturers will begin to test cars in a completely new way to give buyers comprehensive and reliable mpg figures, helping them compare and select the car best suited to the type of driving they do.

The new test is called the World Harmonised Light Vehicle Test Procedure – WLTP for short.

The LowCVP is working with its stakeholder community to ensure the introduction of this new data is of most benefit to the UK market and consumers. Work over the next few months will help transition both the marketing information and the government-related policies to further encourage the uptake of low emission vehicles.


From late 2017, LowCVP expects the new WLTP data to become available and we are working to help present this to consumers in the most consistent way and to ensure labelling, information, policies and, ultimately, taxation frameworks are aligned with the new WLTP as soon as practical.

Key Policy Milestones in Transition to WLTP

Manufacturer type approval for new cars

  • WLTP has been mandatory for new car models approved from 1st September 2017 and will be mandatory, with exceptions, for all new car registrations from 1st September 2018.

Taxation

  • From 1st September 2017 cars approved under WLTP will continue to be taxed against the NEDC CO2 emission figures.
  • From 6th April 2020, taxation will adopt the WLTP CO2 emission figure.

Consumer Information


  • During 2018 manufacturers will start showing WLTP performance data for new car models on their websites; this data will also be shown on the VCA website.
  • From January 2019 consumer information will switch to presenting WLTP fuel and electricity consumption plus electric range figures. The NEDC CO2 value will continue to be presented in consumer information; the WLTP CO2 value will not be shown.
  • From 6th April 2020 consumer information will switch to showing the WLTP CO2 emission figure.
  • The Vehicle Certification Agency (VCA) will be releasing guidance on presenting WLTP values in consumer information over the next few months. The VCA will start showing WLTP values on the Government's fuel economy and CO2 database from September 2018.

The LowCVP have published a free guide for the automotive industry, to provide an overview of WLTP and its transition into UK policy and consumer information, which can be downloaded by clicking the link below:

Automotive Industry Guidance

 

Frequently Asked Questions:

Why do we need a new fuel economy test?

Predicting how much fuel we might use in a new car is vitally important for drivers but can be very challenging. The current ‘official’ figures are primarily intended as a way of comparing different cars, but the test (known as the NEDC) has its origins in the 1970s and has not kept up with rapidly developing car technology, and has become less representative of ‘real driving’. This has led to a significant difference between the miles per gallon reported in the official test and what most drivers really achieve in normal driving. During normal driving conditions the fuel consumption can vary widely due to factors such as driving style, road and traffic conditions, vehicle options and weather etc.

With the increasing range of powertrain technologies available in today’s cars, it is important that car buyers have accurate and more realistic information about the performance and capability of new cars and can make a really informed decision about which will be best for their individual journey. To give a better picture of what fuel economy we might expect when choosing a new car, the automotive industry and governments have come together to develop a new CO2 and fuel consumption test which will give more realistic and representative figures. This test will also be used to measure the emissions which affect air quality.

Every new type of car model will be tested against WLTP starting from 1st September 2017, and as of September 2018 all new cars on sale will have WLTP test information available.

Importantly, the new WLTP test will become the only truly comparable measure across every car and manufacturer which is verified by governments and certification bodies and this data should not be confused or compared with other road tests or ‘real world’ indices.

Fuel Gauge

How have test conditions been improved under WLTP?

WLTP tests are conducted in a laboratory to ensure accuracy and repeatability, but introduce much more representative testing conditions based on data from ‘real driving’ and will provide a more accurate basis for measuring emissions and calculating a car’s fuel consumption. This will provide consumers with more detailed and realistic car performance data. The new test involves a significant number of key changes compared to the ‘old’ NEDC test.

Realistic and broader range of driver journeys - from congested city driving to free-flowing motorway traffic:

  • Cycles based on real driving.
  • Fewer stops and less idling time.
  • Higher average and maximum speeds - including real motorway speeds.
  • Longer overall testing time - increased from 20 to 30 minutes

More realistic driving styles:

  • More dynamic acceleration and deceleration - typical of today's road traffic.
  • Representative gear changing points determined for each vehicle

More realistic test conditions:

  • Ambient temperature based on 14℃ rather than between 20℃ and 30℃.
  • Inclusion of optional equipment - fuel consumption figures are provided for specific vehicles as sold to the customer, with the options fitted.
  • Much better test preparation, set up and control - to reflect the capability of today’s facilities.

What new data will we see for WLTP tested cars?

Fuel consumption values will be presented for four different driving conditions with an overall combined figure for petrol, diesel, hybrid and plug-in hybrid cars.

Each of these elements is based on the typical types of journeys made by drivers.

(old) NEDC Test

NEDC Illustration

Urban
Extra Urban
Combined
- A mixed journey average of both of the elements in the test.

(new) WLTP Test

WLTP Illustration

Low
(City Driving)

City Centre journey with maximum 35 mph.
Medium
(Town Driving)

Town or suburban driving, maximum 50 mph.
High
(Rural Driving)

- Rural driving, A-road or dual carriageway journey, maximum 60 mph.
Extra High
(Motorway)

- Motorway driving with maximum speed of 81 mph, typical of a European motorway.
Combined
A mixed journey, average of all the elements.

 

Conventional petrol/diesel or hybrid cars will have fuel consumption figures for each of the five elements above.

Plug-in hybrid cars are more complex and will have figures for each cycle showing consumption when the engine is running (battery depleted) and a weighted combined figure which accounts for the vehicle operating on both the battery and the internal combustion engine, typical of a longer journey. Battery electric cars have an electricity consumption value for the combined cycle only.

Plug-in hybrid and battery electric cars will now have two electric range figures – a ‘city’ range,  (using the low "city" and medium "town" driving cycles), and a combined range, using the complete cycle. These give the ranges when running on electricity only.

All these figures are designed to help consumers understand which technology and vehicle is best suited to their driving and journey patterns.

 

 


The new test places more emphasis on the detailed vehicle specification than the old test when determining fuel consumption and CO2 emissions. The recognition of factors such as the mass and aerodynamics of the vehicle, the rolling resistance of the tyres and the impact of options fitted to the car by the manufacturer is greatly improved to give a more accurate set of values for an individual vehicle. Drivers will be able to better understand how any options including wheels, tyres, panoramic roof, or any additional weight such as alarms, parking sensors, electric seats etc might affect fuel consumption.

Options

 

Most cars tested under WLTP are likely to show higher CO2 emissions and lower fuel economy figures than the same car tested under the old NEDC test. This reflects much more accurately day-to-day driving, however the actual on-road consumption is completely unaffected by the test type.

Manufacturers and the Government’s Vehicle Certification Agency are expected to progressively start showing WLTP car performance figures, as new models are approved, on their websites during 2018.

 

Why will WLTP type approved cars still have
NEDC fuel consumption and CO2 figures?

Cars tested under WLTP will also have NEDC equivalent CO2 and fuel consumption values until 2020. Manufacturers must also continue to use the NEDC equivalent CO2 figure when reporting their fleet average CO2 emission performance of new cars (which were set against NEDC until 2020/2021).

In order to help car buyers compare fuel consumption and vehicle tax between different cars, some of which will be tested under the old NEDC test and some under the new WLTP test, the use of these "NEDC equivalent" values will ensure appropriate comparisons are still possible during the transition. However, it is vital that NEDC and WLTP are not confused. A person could mistakenly think a car tested under WLTP was less efficient and so more expensive to run than a similar car tested under NEDC, which may show lower CO2 emissions, and better fuel economy. Avoiding this confusion is the primary aim of the LowCVP working group.

Consumers are required to have access to new car CO2 and fuel consumption information at the ‘point of sale’ under the Passenger Car (Fuel Economy and CO2 Emission Information) Regulations. This covers car labels, posters and displays at dealer/retailer showrooms and manufacturers’ printed marketing materials including adverts and brochures.

The regulations were amended during the first week of June 2018 to take into account the introduction of WLTP. NEDC fuel consumption and electric figures will be used in consumer information until Jan 2019, then switch to WLTP.

The NEDC CO2 figure will continue to be shown until end of March 2020, then switch to the WLTP value.

What happens with vehicle tax?

Cars approved under WLTP will continue to be taxed against the NEDC CO2 emission value, so there is no change to the CO2 based taxation systems in the short term. This includes vehicle tax (VED) and company car tax (BIK).

The LowCVP is working with a wide range of government departments and stakeholders to assess the impact of regulatory changes on taxation bands but it is not expected that any structural changes will be made before 6th April 2020.

Timetable of Changes

From 1st September 2017
New car models approved using WLTP.
  • Taxation continues to be based on NEDC CO2 emission figure.
  • Car labels and printed marketing material show NEDC fuel consumption and CO2 values, as well as electricity consumption and electric range.
From early 2018
WLTP data available for a range of vehicles
  • LowCVP publishes consumer guidance with coordinated industry supported approach
  • Using new WLTP data, proposals for policy transition begin to be developed
From 1st September 2018
All new cars produced have WLTP information available.
  • Taxation continues to be based on NEDC CO2 emission figure.
  • Car labels and printed marketing material continue to show NEDC fuel consumption and CO2 values.
From 1st January 2019
  • Consumer information will show WLTP fuel and electricity consumption values plus electric ranges. The NEDC CO2 emission value will continue to be presented, the WLTP CO2 value will not be shown.
From 6th April 2020
  • Taxation and CO2 related policy switches to WLTP CO2 emission figures.

 

Further Information